FDA Finalizes Guidance on When to Submit a 510(k) for a Change to an Existing DeviceNovember 14, 2017
On October 25, 2017, FDA issued a final guidance: Deciding When to Submit a 510(k) for a Change to an Existing Device. This guidance is a final version of the draft issued in 2016 (see our post on the 2016 draft here). Despite receiving a significant number of comments, the final guidance is largely unchanged from the 2016 draft. Industry should also be comforted to know that the final guidance is also, at its core, very similar to the 1997 guidance – a welcome relief as compared to the 2011 draft guidance.
The most significant change from the draft to final guidance has to do with the analysis for labeling changes. As we discussed in our blog post on the draft guidance, the draft merely acknowledged that changes to the indications for use were some of the most difficult to assess. The draft guidance did little to elaborate on how a 510(k) holder should assess whether a new 510(k) is required for a changed to a device’s indications for use. The final guidance seeks to provide additional clarity, and in fact, adds five additional questions to Flowchart A, Labeling Changes (Questions A1.1 – A1.5).
These additional questions suggest that if an indication change goes from single use to multiple use or from prescription use to OTC use a new 510(k) is always required. The questions also highlight that there may be additional flexibility in other types of indication changes. For example, if a change does not “describe a new disease, condition, or patient population” nor does a “risk-based assessment identify any new risks or significantly modified existing risks,” a change to the indications for use may be documented without a new 510(k).
We should also highlight a new example FDA includes in Appendix A of the final guidance. This example highlights an indication for use change using a cleared device on a similar, closely related anatomical area. FDA proceeds through the new flowchart and concludes that a new 510(k) is required because, although “there are no new or increased safety risks associated with the use of the device . . . the new indication for use is associated with a risk of significantly reduced effectiveness” due to the difference in anatomical area. We read this example as saying that any indication change where new effectiveness data is required to support an indications for use change, a new 510(k) will be required, because the change “could” affect safety or effectiveness. In sum, manufacturers should ensure that they carefully consider the examples in Appendix A as well as the text associated with the flowcharts when assessing whether a new 510(k) is required. The examples and text should especially be discussed when a decision not to file a 510(k) is documented.
A notable carry-over from the draft guidance is FDA’s requirement that decisions not to file a new 510(k) be thoroughly documented. The final guidance makes clear that simple yes/no responses or flowcharts are insufficient. The final guidance includes sample “regulatory change assessments” with narrative explanations and responses to each inquiry in the decision-making flow chart.
A few other noteworthy changes between the final and the draft guidance include:
- The Guidance document emphasizes that it is “not intended to implement significant policy changes to FDA’s current thinking on when submission of a new 510(k) is required,” but rather the intent of the guidance is to “enhance predictability, consistency and transparency of the “when to submit’ decision-making process.” Accordingly, unlike with some other significant guidance documents, FDA has not provided for a future effective date for the final guidance meaning that it went into effect immediately on October 25th.
- The final guidance adds an introductory statement regarding the least burdensome provision, which is unsurprising in light of the provisions in the 21st Century Cures Act re-emphasizing “least burdensome.”
- FDA clarifies that this guidance applies to remanufacturers and relabelers who hold their own 510(k).
- In conjunction with this guidance, FDA also issued a guidance regarding when to submit changes for a software device. The final guidance clarifies that when there are multiple changes, including changes covered by this guidance as well as software changes, the changes should be analyzed under both guidances and if either guidance results in a new 510(k) being required, one should be submitted.
In sum, the final guidance provides some additional clarity beyond the 2016 draft guidance and is conceptually very similar to the 1997 guidance. This final guidance, much like the 2016 draft, provides additional detail and explanation as compared to the 1997 guidance intended to aid manufacturers in making the often difficult decision as to whether a new 510(k) is required for a change to a device. However, as discussed above, with the extensive examples provided in this final guidance (more than 40 individual examples are provided in Appendix A) some of the manufacturer judgment allowed for by the flowcharts may be lost and manufacturers should be cautioned to consider carefully the examples provided in the Appendices when making their decisions.